Description Paint & Peel Liquid Masking Film White Just Paint & Peel. Extremely fast & easy to use. Clean removal – just peels off. Can be sprayed, rolled or brush applied. Perfect for glassed timber doors. Can also be used as a protective film for external environments. Water based so low toxicity. Available in 1KG & 5KG Application Guide. Prepare Surface by removing all debris & dust and sand timber down. If the timber had been previously painted ensure the timber is fully sanded before applying Paint & Peel. Stir thoroughly then apply Paint & Peel with either a synthetic bristle brush, long nap roller (mid pile) or conventional airless sprayer, recommended fluid tip size of 0.013 to 0.017. Theoretical coverage 2mt square per litre @ 200µ DFT. Leave to fully cure – once Paint & Peel is fully dry repeat process for a 2nd coat – should take 30 to 60 mins. When the painting process is finished remove the Paint & Peel by cutting around the inside edges of the frames with a sharp knife & simply peel away from the substrate. After use clean any application tools with warm water.
